Composition catalysts of ethylbenzene oxidation based on bis(acetylacetonato)nickel(ii) and phase transfer catalysts as ligands 1. Macrocyclic polyethers

The addition of the macrocyclic polyether 18-Crown-6 (18C6) increases the selectivity of oxidation of ethylbenzene to -phenylethylhydroperoxide (PEH) in the presence of Ni(acac)₂. The initial oxidation rate, selectivity and degree of conversion of ethylbenzene to PEH are greater than those catalyzed by Ni(acac)₂ only. The efficiency of the macrocyclic ligand as an activator of Ni(acac)₂ exceeds that of monodentate donor ligands. The high selectivity of the process is due to both the primary Ni(acac)₂ · 18C6 complexes and the products of their transformation in the course of oxidation. The mechanism of ethylbenzene oxidation catalyzed by Ni(acac)₂ · 18C6 complexes is discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1406–1411, August, 1994.     

2-Quinazolylguanidines in Heterocyclization Reactions. 2. Condensation with α,β-Unsaturated Carbonyl Compounds

4,6,6-Trimethyl-1,4-dihydropyrimidines have been synthesized by condensation of 2-quinazolylguanidines with mesityl oxide. The analogous reaction with benzalacetone leads to unstable 4-methyl-6-phenyl-1,4-dihydropyrimidines, which are oxidized to the corresponding 4-methyl-6-phenylpyrimidines.     

Hydrogen Oxidation on a Platinum Microelectrode: Effect of Carbon Monoxide Impurities

The kinetics of the hydrogen oxidation and the CO adsorption on a Pt (ultra)microelectrode is studied in a 0.5 M H₂SO₄ solution saturated with a mixture of gaseous H₂ and CO at partial CO pressures p _CO = 10–500 ppm. The balance between rates of diffusion and adsorption of CO at different adsorption times is studied. Studied is the effect of CO impurities in H₂ on steady-state polarization curves for the hydrogen ionization and nonsteady-state curves of the oxidation current decay with time at 0.02–0.05 V. Conditions under which in a certain time interval and at a certain CO concentration the slope of an I vs. t curve is proportional to p _CO are determined. The obtained dependence may be used when designing a technique for monitoring CO impurities in technical hydrogen.     

Oxidation of 2-dialkylaminomethyl-4,6-di-tert-butylphenols

Oxidative transformations of 2-dialkylaminomethyl-4,6-di-tert-butylphenols depend on the nature of the oxidant, the character of the substituents at the nitrogen atom, and the medium. A mechanism of the oxidation of these compounds is suggested. The molecular structure of the compound obtained as a result of oxidative trimerization of 2-dimethylaminomethyl-4,6-di-tert-butylphenol was established by X-ray structural analysis. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1328–1335, July, 1997.     

制备参数对高比表面积介孔催化剂La-Co-Zr-O结构与性能的影响

采用双表面活性剂模板(十六烷基三甲基溴化铵和聚乙二醇辛基苯基醚的混合物)分解法制备了不同原子比(n_La+n_Co)/(n_La+n_Co+n_Zr)和不同温度焙烧的系列介孔混合氧化物催化剂La-Co-Zr-O。运用XRD、N₂吸附/脱附、XPS和H₂-TPR等技术对催化剂进行了表征，并以CO和C₃H₈氧化为模型反应，考察了组分配比和焙烧温度等参数对催化剂催化性能的影响。比表面积和孔径测试结果表明，样品具有很高的比表面积(108～266 m²·g^-1)和分布集中的孔径(3.4～3.9 nm)，Zr含量较高的样品比表面积较大。XRD结果表明，样品中的活性组分钴物种主要以Co₃O₄形式存在；XPS和H₂-TPR结果表明，样品中可还原的晶格氧的数量、活动度以及表面钴原子浓度均与催化剂对CO和C₃H₈的氧化性能密切相关。原子比为0.5的样品中，较多的晶格氧易于在相对低温下还原；而原子比为0.7的样品表面钴原子浓度较高，这使得两样品均表现出较高的催化活性。经650 ℃焙烧的样品仍保持较高的比表面积(108 m²·g^-1)和分布集中的介孔孔径(最可几孔径约3.8 nm)，且催化活性下降幅度也很小，表明该系列介孔催化剂具有优良的抗烧结能力和介孔热稳定性。     

Ru/Mn-Ce/TiO2催化剂催化湿式氧化丁二酸的反应活性和动力学研究

在二氧化钛载体中通过掺杂Ru，Mn，Ce制备了一系列用于催化湿式氧化的催化剂，利用XRD，TEM，BET等手段对催化剂进行了表征．在反应温度T=210～270℃，氧分压Po2=2．1MPa条件下，在间歇式高压反应釜中对丁二酸进行了降解实验．催化剂在反应中有很高的催化活性．催化剂在30min内对丁二酸降解的COD去除率为54．4～98．3％．Ru及Mn，Ce的氧化物对催化活性都有促进作用．建立了丁二酸催化湿式氧化的一级分段动力学模型．基于COD的一段及二段反应的活化能分别为43．74kJ／mol和54．28kJ／mol．     

介孔Co3O4-CeO2复合氧化物的制备及在CO选择性氧化中的应用

以硝酸钴和硝酸铈为前驱物，SBA-15为硬模板，利用双溶剂法制备了Co3O4-CeO2介孔复合氧化物，通过X-射线衍射、N2吸脱附测试、程序升温还原和透射电子显微镜等技术对活性组分及载体进行了表征，并且与浸渍法和共沉淀法所制备的催化剂进行了对比分析。结果表明，相比于浸渍法和共沉淀法，采用双溶剂法制备的介孔Co3O4-CeO2复合氧化物具有均匀的介孔结构、较小的颗粒尺寸、较大的比表面积和较高的活性组分分散度。此外，CO氧化脱除评价显示与常规的共沉淀法和浸渍法所制备的催化剂相比该介孔复合氧化物具有较高的反应活性和选择性，其高活性主要归因于较高的比表面积和活性组分的高分散度。     

Oxidation of Heterocyclic Compounds by Permanganate Anion. (Review)

Data on the oxidative transformations of heterocyclic compounds with permanganate anion are reviewed     

DSC combined with chemiluminescence for studying polymer oxidation

The oxidation of (Ti,W)C ceramics have been studied as a part of the program to investigate of properties of powder materials. Thermogravimetry, derivative thermogravimetry (TG-DTG), and differential thermal analysis DSC have been used in the non-isothermal study of powder oxidation (Ti,W)C in dry air atmosphere. The powder of crystalline carbide cermets with a ratio of W:Ti equals 0.3 was used in this study. The diagrams were recorded on a sample mass 3.42 mg on the Setaram apparatus in temperatures ranging from 25 to 1000°C. Seven different heating rates were used. The analytical techniques SEM, WDX, EDX and XRD were used in the research. The kinetics of the oxidation process was followed by the integral method by applying the Coats-Redfern's approximation. The kinetic models of particular stages of (Ti,W)C oxidation were evaluated from the dynamic mass losses data. The values of apparent activation energy E and the pre-exponential factor A of each stage of the oxidation were calculated. This revised version was published online in July 2006 with corrections to the Cover Date.     

新型分子筛Ti-MMM-1的合成及其催化性能的研究

通过控制TEOS的水解，在不同时间添加与MCM-41和MFI相应的有机模板剂合成出了一种新型分子筛，Ti-MMM-1，采用XRD、FT-IR和低温N2吸附对其进行表征，并用H2O2氧化环己烷和环己醇对其催化活性进行评价．结果表明，Ti-MMM-1是一种具有MCM-41和MFI结构的两相混合的微孔／介孔材料，IR分析表明钛原子已进入分子筛骨架，并在环己烷和环己醇的氧化中表现出较好的催化活性和较高的选择性．